n2112 tkim tc-00002851/o0808ea tiim tc-00001605 no.a1286-1/6 http://onsemi.com semiconductor components industries, llc, 2013 september, 2013 mch6121 bipolar transistor ? 12v, ? 3a, low v ce ( sat ) , pnp single mcph6 stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty. applications ? relay drivers, lamp drivers, motor drivers, line switch features ? adoption of mbit process ? large current capacity ? low collector-to-emitter saturation voltage ? high speed switching ? ultrasmall-sized package permitting applied sets to be made small and slim (0.85mm) ? high allowable power dissipation ? halogen free compliance speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-base voltage v cbo -15 v collector-to-emitter voltage v ceo -12 v emitter-to-base voltage v ebo -5 v collector current i c -3 a collector current (pulse) i cp -5 a base current i b -600 ma collector dissipation p c when mounted on ceramic substrate (600mm 2 0.8mm) 1w junction temperature tj 150 c storage temperature tstg -55 to +150 c package dimensions unit : mm (typ) 7022a-007 ordering number : ENA1286A product & package information ? package : mcph6 ? jeita, jedec : sc-88, sc-70-6, sot-363 ? minimum packing quantity : 3,000 pcs./reel packing type : tl marking electrical connection ax lot no. lot no. tl 1 : collecto r 2 : collecto r 3 : base 4 : emitter 5 : collecto r 6 : collecto r mcph6 2.0 0.25 1.6 2.1 0.25 0.85 0.3 0.65 0.15 0 to 0.02 0.07 654 123 654 123 1, 2, 5, 6 4 3 mch6121-tl-h
mch6121 no.a1286-2/6 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb = -12v, i e =0a -0.1 a emitter cutoff current i ebo v eb = -4v, i c =0a -0.1 a dc current gain h fe v ce = -2v, i c = -500ma 200 560 gain-bandwidth product f t v ce = -2v, i c = -500ma 380 mhz output capacitance cob v cb = -10v, f=1mhz 40 pf collector-to-emitter saturation voltage v ce (sat) i c = -1.5a, i b = -30ma -110 -165 mv base-to-emitter saturation voltage v be (sat) i c = -1.5a, i b = -30ma -0.85 -1.2 v collector-to-base breakdown voltage v (br)cbo i c = -10 a, i e =0a -15 v collector-to-emitter breakdown voltage v (br)ceo i c = -1ma, r be = -12 v emitter-to-base breakdown voltage v (br)ebo i e = -10 a, i c =0a -5 v turn-on time t on see speci ed test circuit. 30 ns storage time t stg 90 ns fall time t f 14 ns switching time test circuit ordering information device package shipping memo mch6121-tl-h mcph6 3,000pcs./reel pb free and halogen free v r 1k v cc = --5v v be =5v i c =20i b1 =--20i b2 =--1.5a + + 50 input output r l 220 f 470 f pw=20 s i b1 d.c. 1% i b2 it04544 i c -- v ce collector-to-emitter voltage, v ce -- v collector current, i c -- a 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 --2.0 --1.6 --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 --1.8 --2ma --4ma --6ma --8ma --10ma --12ma --16ma --14ma i b =0 ma i c -- v be collector current, i c -- a base-to-emitter voltage, v be -- v it04545 0 --3.0 --2.5 --2.0 --1.5 --1.0 --0.5 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 v ce =--2v 25 c ta=75 c --25 c
mch6121 no.a1286-3/6 collector current, i c -- a it04546 h fe -- i c dc current gain, h fe 100 0.01 2 3 5 7 2 3 5 7 1000 --0.01 23 57 --0.1 23 57 --1.0 --10 23 57 v ce =--2v ta=75 c --25 c 25 c it04547 --0.01 10 --0.1 --1.0 23 57 23 57 23 5 1000 100 7 5 3 2 7 5 3 2 f t -- i c v ce = --2v collector current, i c -- a gain-bandwidth product, f t -- mhz 10 7 5 3 2 100 --1.0 --10 23 57 23 it04548 cob -- v cb f=1mhz collector-to-base voltage, v cb -- v output capacitance, cob -- pf --1.0 --10 --100 --0.01 --0.1 23 57 --1.0 23 57 --10 23 57 3 5 2 7 2 3 5 7 5 3 2 v ce (sat) -- i c it04549 i c / i b =20 25 c ta=75 c --25 c collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv --0.01 --0.1 --1.0 23 57 23 57 23 5 --10 --100 v ce (sat) -- i c 2 3 5 7 2 3 5 i c / i b =50 25 c ta=75 c --25 c it04550 collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- a 2 3 5 7 2 v be (sat) -- i c it04551 --0.1 --1.0 --0.01 --0.1 23 57 --1.0 23 57 23 57 i c / i b =50 25 c ta=75 c --25 c collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- v --1.0 2 3 5 7 2 --10 2 3 5 7 0 0 20 40 60 80 100 120 1.0 0.8 0.6 0.4 0.2 1.2 140 160 --0.01 --0.1 2 3 5 7 it13915 it13914 --0.01 --0.1 23 57 2 --1.0 357 2 --10 357 23 i c = --3a i cp = --5a 1ms 10ms 100ms dc operation (ta =25 c) 100 s 500 s collector dissipation, p c -- mw p c -- ta ambient temperature, ta -- c aso <100 s collector-to-emitter voltage, v ce -- v collector current, i c -- a ta=25 c single pulse when mounted on ceramic substrate (600mm 2 0.8mm) when mounted on ceramic substrate (600mm 2 0.8mm)
mch6121 no.a1286-4/6 embossed taping speci cation mch6121-tl-h
mch6121 no.a1286-5/6 outline drawing land pattern example mch6121-tl-h mass (g) unit 0.008 * for reference mm unit: mm 0.65 0.65 0.4 2.1 0.6
mch6121 ps no.a1286-6/6 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner.
|
